This is a 3d printed a/c flush tool for a 4th gen ram that uses an expansion valve a/c system. The nipple on the outlet is 1/2" outside diameter so you can run a hose into a bucket. Disregard the photo of the device next to the expansion valve, that was a prototype. This mounts using the factory hardware so you can flush the evap core with ease. ALWAYS replace the seals on the evap core after use. Printed from ABS GF. It is extremely durable.
NOTE : There are two designs on these, 2010-2011 have CENTERED bolt holes (see pictures) and the later models 2012-2018 have OFFSET bolt holes. Make sure to purchase the correct style.
